博客

LVDS屏幕只有背光如何解決？

已有 1464 次閱讀2019-3-13 15:27 | LVDS屏幕, 嵌入式開發板, 核心板, 主板

問：LVDS屏幕uboot和kernel都沒顯示,只有背光

答：run load_scr; source;
setenv disp_fb0_lvds1 "video=mxcfb0:dev=ldb,LDB-WXGA,if=RGB666 ldb=sin1"
setenv display "${disp_fb0_lvds1}"
saveenv; boot
燒錄后環境變量設置

問：我這個屏的參數U-BOOT班級文件配置：
      .bus = -1,
      .addr = 0,
      .pixfmt = IPU_PIX_FMT_RGB666,
      .detect = NULL,
      .enable = enable_lvds,
      .mode = {
            .name          = "MYZR-WSVGA",
            .refresh       = 60,
            .xres          = 1280,
            .yres          = 800,
            .pixclock    = 14507,
            .left_margin = 34,
            .right_margin = 34,
            .upper_margin = 3,
            .lower_margin = 3,
            .hsync_len    = 60,
            .vsync_len    = 10,
            .sync          = FB_SYNC_EXT,
            .vmode       = FB_VMODE_NONINTERLACED

設備樹文件配置：
lvds-channel@0 {
            fsl,data-mapping = "spwg";
            fsl,data-width = <18>;
            status = "okay";

            display-timings {
                     native-mode = <&timing0>;
                     timing0: hsd100pxn1 {
                              clock-frequency = <68930000>;
                              hactive = <1280>;
                              vactive = <800>;
                              hback-porch = <34>;
                              hfront-porch = <34>;
                              vback-porch = <3>;
                              vfront-porch = <3>;
                              hsync-len = <60>;
                              vsync-len = <10>;
                     };
            };
      };
屏的參數先不改了嗎？

答：http://wiki.myzr.com.cn/index.ph ... ool-v2.6_User_Guide
MfgTool-MYIMX6A9-L3.0.35-Base.svn257.20181228.rar