電子工程網

標題: JLINK V9仿真器,高速不掉固件，最新硬件：9.3版本包郵 [打印本頁]

作者: jia110 時間: 2014-6-12 18:06
標題: JLINK V9仿真器,高速不掉固件，最新硬件：9.3版本包郵
淘寶鏈接：http://item.taobao.com/item.htm?id=36687627833

JLINK V9支持自動升級，手動降級均可以.原裝原廠固件。
采用STM32芯片，不掉固件!

自動升級為最新版本!
固件版本：9.0
硬件版本：9.3
主控芯片更為STM32系列芯片。
跟原裝的對比:

升級為最新版本! J-Link V4.84f

J-LinkJTAG/SWD Emulator with USB interfaceJ-Linkis a USB powered JTAG emulator supporting a large number of CPU cores.
Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes.
J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.
Including all models, more than 100,000 J-Links have been sold so far, making J-Link probably the most popular emulator for ARM cores and the de-facto standard.
Features

Direct download into flash memoryof most popular microcontrollers supported
Supported CPUs: Any ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4, Cortex-R4, RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Download speed up to 1 MByte/second
Supportsunlimited breakpointsin flash memory!1[url=]More info...[/url]
Setting breakpoints inexternalflash memory of Cortex-M systems is possible with
J-Link's[url=]Unlimited Flash Breakpoints[/url]technology only!
Supported by all major IDEs[url=]More info...[/url]
Free software updates2, 1 year of support
Supports concurrent access to CPU by multiple applications3
Crossplatform support (runs on Windows, Linux, Mac OS X)4
Intelligence in the emulator firmware[url=]More info...[/url]
Remote Server included. Allows using J-Link remotely via TCP/IP[url=]More info...[/url]
GDBServer included[url=]More info...[/url]
Production flash programming software (J-Flash) available[url=]More info...[/url]
Software Developer Kit (SDK) available[url=]More info...[/url]
Supports multiple target interfaces: JTAG, SWD
Supports SWV/SWO (Serial Wire Viewer / Serial wire output)
Wide target voltage range: 1.2V - 3.3V, 5V tolerant
Supports JTAG chains with multiple devices
Embedded Trace Buffer (ETB) support
Various target adapters available, including optical isolation adapter.[url=]More info...[/url]
RDI interface DLL available.[url=]More info...[/url]
Fully plug and play compatible
No power supply required, powered through USB
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Target power supply: J-Link can supply up to 300 mA to target with overload protection

配件清單：
1、J-LINK V9 仿真器 1 臺
2、優質USB線 1 條
3、20PIN 優質連接線 1條

歡迎光臨電子工程網 (http://selenalain.com/)

午夜高清国产拍精品福利|亚洲色精品88色婷婷七月丁香|91久久精品无码一区|99久久国语露脸精品|动漫卡通亚洲综合专区48页